Mobile-modern mobile phone is now mostly been equipped with modem functionality, that is, our HP can be used as a modem for Internet connection via GPRS or 3G by connecting it with the PC either with a data cable (recommended), bluetooth or infra red. The following are the steps it (the connection with the data cable): 1. Make sure your phone can be used as a modem (See the manual of your phone) 2. Make sure your HP Card GPRS setting is active. 3. Make sure the signal is enough for GPRS connection 4. Connect your phone with data cable (or bluetooth) to your PC, automatically in Windows XP, the modem will be detected. 5. Make sure the Modem Driver (HP detected on your PC) you can see in the list of modems installed in the Control panel - Phone & Modem 6. Create a New Connection: a. Control Panel - Network Connection - Create New Connection b. will open a new window: next - Connect to the Internet - Set up My Connection Manually - Connect Using Dial Up Modem - c. ISP Name = browse by name cards let you easily. (Eg Axis, M3, XL, etc.) d. Phone Number: 99 ** 1 # e. Username and password in accordance with the Username and Password at the card gprs settings you will see here (note the uppercase lowercase). complete 7. Create extra settings for the modem, according to your SIM card, how: Control Panel - Phone & Modem options - Modems - Properties - Advanced - Fill Extra Settings: To IM3: AT + CGDCONT = 1, "IP", www.indosat-m3. net "For AXIS: AT + CGDCONT = 1," IP "," AXIS "For the Sun: AT + CGDCONT = 1," IP "," indosatgprs "For Sympathy: AT + CGDCONT = 1," IP "," Telkomsel " For the XL: AT + CGDCONT = 1, "IP", "www.xlgprs.net" to three: AT + CGDCONT = 1, "IP", "3gprs" gampangannya in the second quotation mark, is the access point name (APN) according to GPRS settings of your card.
Good luck.
No comments:
Post a Comment